MORE-A Multi-Objective Ranking Environment for Risk Assessment
This paper explores the development of a computerized decision support system for ranking risks due to environmental concerns. The paper begins with a brief history a comparative risk...
Unification in Estimation of Confidence Intervals
One area of future development needs in technology pertaining to surface runoff hydrology is the unification of techniques used by govermental agencies in the estimation of surface runoff...
p-Version Three Dimensional Curved Shell Element for Geometrically Nonlinear Behavior
This paper presents a p-version hierarchical geometrically nonlinear formulation based on the total Lagrangian approach for a nine node three dimensional curved shell element. The element...
Two Dimensional Analysis of Strain Localization with Nonlocal Continuous Damage
This paper addresses the problem of damage localization from a theoretical stand point with a nonlocal model. Conditions for non uniqueness of the rate equations of equilibrium are derived...
Tensile Failure in Concrete by Spallation
Plate impact experiments were performed on concrete specimens to study tensile failure at high strain rates. For tensile stress pulse durations of 1.5 and 2.2 ms the threshold stress for...
A Theory of Porous Plasticity at Low Triaxiality
A simple multiaxial theory of plasticity which is capable of taking into account the influence of pore shape at low concentration is developed for an isotropic porous material at a triaxiality...
Healing or Negative Damage in Concrete
The deformation of concrete may be attributed to damage or the evolution of microcracks and to mechanical healing or the closing of microcracks. For damage, dissipation is positive but...
Cooperative Fracture?Statistical Models
The brittle failure of certain engineering materials represents but an ultimate phase in a process characterized by an evolving system of microdefects distributed over a large part of...
Finite Element Stress Analysis of a Spinal Segment
A large number of factors need to be determined to understand the biomechanics of a surgical procedure about the lumbar spine. Some of these factors are amenable to experimental investigations...
Structural Responses in Mechatronics
The design analysis of a circular cylinder, ring-stiffened intermittently, subject to conducting flow, is presented herein (Fan, 1986 & 1990). This composite cylinder is made of...
Modelling of Tubes with Large Plastic Deformation
A thin circular tube laterally compressed between two rigid plates is investigated for its load(P)-displacement(?) behaviour. The moving hinge concept yields a good prediction compared...
On the Solution of Plates and Shells Mixed Boundary Problems
Strain-stress state analysis on plates and shells under mixed boundary conditions is of significant practical value: a lot of problems, arisen in machine design, civil engineering etc.,...
Finite Element Stability of Eccentrically Stiffened Plates
A finite element model is developed to investigate the elastic stability of eccentrically stiffened rectangular plates. The formulation is based on the behavior of the plate-stiffener...
Localized Collapse of Shells of Revolution
A local-global methodology is presented to treat the problems of localized collapse of shells of revolution. The strategy consists of employing two dimensional general shell elements in...
Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...
Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...
Use of Laser Holography and Image Analysis for Crack Measurement and Determination of Strain Fields in Cement Based Materials
The authors have successfully used laser holographic interferometry to measure various parameters, such as crack size, crack spacing, crack opening displacement, surface displacements...
Visualization of the Microstructural Response of Lightly-Cemented Granular Soils Under Uniaxial Strain Conditions
The microstructural response of granular soil under uniaxial strain is being investigated through direct observation of micromotions. Two techniques are being refined to quantify individual...
Development of a Constitutive Model for Impact Limiters
A constitutive model is being developed for 'impact limiter' materials such as aluminum honeycombs and polyurethane foams. Among other applications, these materials...
Fracture Response of Cement Matrices Reinforced with High Volume Fiber Fraction
Toughening mechanisms of cement matrices reinforced with high volume fiber fraction have been experimentally studied by quantitative image analysis and laser holographic interferometry....
Return to search